Frequency Allocation Research Paper
Reaching the Masses: Frequency Allocation and the FCC’s Simultaneous Ascending Auctions
Introduction and Interpretation
In order to understand exactly what is meant by “frequency allocation,” a basic understanding of the physics of broadcasting is necessary. Electromagnetic waves exist all around us, and are created by a variety of different sources — from the Sun to a microwave to the radio transmitter of your local college radio station. These waves are all essentially the same “thing” (or the same energy, perhaps; a discussion of the wave vs. particle aspect of electromagnetic waves is beyond the scope of this paper and is also beside the main point), but they have different wavelengths, which cause them to behave in very different ways. A wavelength is defined as the distance between two crests (or two troughs) of the same wave, and radio waves have some of the longer wavelengths of the non-visible electromagnetic spectrum (NASA 2010). Because all electromagnetic waves travel at the same speed in a vacuum, changing the wavelength also changes the frequency of the wave (the number of crests/troughs that pass in a given period of time), and these different frequencies can be picked up individual by fine-tuning receivers. “Frequency allocation” refers to the classification and licensing of different frequencies by governments for use in communications and transmitting information to avoid several entities attempting to use the same frequency (FCC 2010).
Countries are in need of frequency allocation systems and processes to ensure that communications and scientific research can continue unimpeded, aiding in commerce and discovery as well as scientific development, entertainment, and simple communications between various individuals/entities. An examination of the United States’ frequency allocation table shows the wide variety of uses that exist for radio waves and the many different allocations that have been made in this country in regards to allocation, detailing the complexity of the situation and thus highlighting the need for an organizing body to allocate and regulate the use of these frequencies (NTIA 2010). Without such systems in place, communications would essentially become impossible as different transmissions would be competing for the same frequency, making the receiving of a clear, single signal all but impossible. A simple way to picture this is just recall a time in which your car radio appeared to be trying to decide between two different channels — in areas where coverage maps overlap slightly, to radio station might be broadcasting at the same (or very similar) frequencies, and the receiver in your car is unable to produce a clear sound from either station — it is picking up both signals. Frequency allocation eliminates this occurrence in most instances (FCC 2010a).
History and Context
In the very early days of radio transmission, there was no real need for frequency allocation as there were few receivers set up and even fewer transmitters, especially of any power; if there is no overlap in the coverage area of two or more given radio signals, then an overlap in frequencies does not matter — geographic distance will eliminate any possible confusion on the receiving end (FCC 2010a; Huurdeman 2003). Radio spread quite quickly, however, and the need for frequency allocation by national governments and eventually international bodies quickly became apparent, leading to the development of agencies for this purpose (Huurdeman 2003).
As uses for radio waves continued to grow, the need for frequency allocation also became more pressing and more complex. Radios are not the only devices that make use of radio waves; radio telescopes are advanced pieces of technological equipment used to study the vast reaches of deep space, and frequency allocation ensures that these devices will not be bombarded with communications signals in their efforts (NTIA 2010). There are also a variety of other more common and familiar devices that are utilized by billions of individuals on a daily basis that require the use of radio waves — televisions, cell phones, wireless Internet connections, and pretty much any device that sends and/or receives information of any sort without the use of direct connections works via the broadcast of radio waves (electromagnetic waves of specific frequencies are also used in hardwired communication devices, but as they are not broadcast through the open air they are not an issue here (FCC 2010a; Withers 1993).
Early on in the 1920s and 30s, when television was just being developed and causing serious competition for radio frequency rights for the first time, the relatively new Federal Communications Commission and Congress allocated frequencies based on current technological capabilities and patent holdings for the few working television transmission devices (Kittross and Sterling 1979). RCA was a major player in these actions as it held a near-monopoly of television broadcasting and receiving technologies through various acquisitions and partnerships (Kittross & Sterling 1979). Neither this monopoly nor this system would hold, however.
Not only did television manufacturers and broadcasters increase and grow exponentially in the years following World War II, but modern devices and improved broadcast strengths covering wider geographic areas have also hugely increased the need for more precise and more variegated frequency allocations (NTIA 2010; Withers 1993). For this reason, more frequent and more complex as well as more comprehensive methods have been developed to assist the frequency allocation procedure in countries around the globe including the United States (FCC 2010a; Withers 1999). The Federal Communications Commission is still the body responsible for frequency allocation in the United States, and it does so through a variety of processes, including through the direct creation of rules based on information provided through industry lobbyists and government analysts (FCC 2010a). The use of auctions, in which the licenses to utilize specific frequencies and bandwidths, is often used to give specific access rights to various corporate entities, but this occurs only after the radio wave spectrum has been divided into the many different broader categories and purposes for which radio waves are used (Webpaz 2010).
The reasons behind the need for frequency allocation should be fairly clear at this point; the reasons for developing and adjusting specific processes to achieve these allocations is perhaps less so. Essentially, processes must be developed to keep broadcast rights and frequency access fair and effective, ensuring that it isn’t simply the entity with the most money that has the greatest broadcast rights (Withers 1999). Processes are deigned to ensure that necessary technologies and companies have the access to the radio wave spectrum that they need while keeping the allocation as democratic as possible (FCC 2010a).
Determining the cost of “owning” a frequency (which is more accurately described as leasing the license to use a particular frequency, as the broadcast spectrum is actually considered a public commodity and thus cannot be technically owned by any private or for-profit entity, or any entity at all, for that matter) is a complex matter. Certain bandwidths are specifically reserved for public use, such as amateur radio operators and enthusiasts; these frequencies are essentially free but there are significant limitations to broadcast strength and distance that are available in these frequencies (NITA 2010; Withers 1999). When it comes to the cost of stronger bandwidths with a greater latitude of rights in the use of these frequencies, prices are quite high — over ten billion dollars was spent in a bidding process for the ultra-high frequency channels 60 through 69 in a recent auction for newly available frequencies (Cringely 2008). This equates to more than one billion dollars for every useful stretch of bandwidth made available in this auction, presenting a rice tag that is definitely out of reach for the average consumer and even most companies.
In order to even be able to bid for open frequencies, a certain amount of money must be initially deposited at the beginning of the bidding process (Cramton 2004). The amount deposited determines how many “items” (i.e. sections of bandwidth) a given company can bid on, meaning that companies with lower deposits are able to bid on fewer sections of bandwidth (Cramton 2004). While there is no official minimum price to enter a bid, these rules effectively create limits wherein companies without sufficient funds to make a realistic bid are left out of the process.
SAA-Simultaneous Ascending Auction
The current process used by the Federal Communications Commission to allocate bandwidth to various companies for a variety of uses — sometimes at the complete discretion of the purchasing entities, and other times for fairly specific purposes such as television broadcasting or cell phone communications — is the Simultaneous Ascending Auction, first used in 1994 (Cramton 2004). Briefly put, a simultaneous ascending auction is a bidding process in which successive rounds of sealed bidding for multiple items takes place, with the high bids for each items being published at the end of each round, enabling bidders to see what current bids are and adjusting their bids for items in the next round accordingly (Cramton 2004; Milgrom 1999).
This auction system is especially useful for purposes of frequency allocation because there are generally multiple sections of bandwidth/frequencies available when any one section or frequency is available, and companies can utilize one or more of these frequencies fairly interchangeably (Cramton 2004). Simultaneous auctions are held only when they are needed, such as when a new areas of bandwidth are opened up for use by the FCC, yet dozens of such auctions were held in the first decade following their inception alone (Cramton 2004; Webpaz 2010). Using web-based technologies greatly assists in the practical functioning of simultaneous ascending auctions, as it allows bidders form disparate geographical locations to participate in the process quite easily, making the process more fair than it might otherwise be (Millgrom 1999).
In order to participate in a simultaneous ascending auction, companies must make these initial deposits according to the rules set out by the Federal Communications Commission at each auction, which can vary somewhat depending on the sections of bandwidth being auctioned and the number of different “items” being offered for sale (Milgrom 1999; Cramton 2004; FCC 2010a). Technically, any entity is allowed to participate in the simultaneous ascending auction process to bid on and purchase frequencies as long as they can prove that they have the capabilities to put these frequencies to efficient and effective use. In reality, however, the final cost of purchasing the licenses to radio spectrum frequencies is prohibitive to most companies and unofficially limits the pool of potential bidders and overall participation in the bidding process.
In order to participate in the bidding process, stakeholders must go through an application process that culminates in their depositing of at least a minimum amount of funds to be used in the bidding process, which goes directly to the government (in the United States, to the U.S. Treasury via the Federal Communications Commission) to cover the final purchase price of the given frequency/bandwidth (Millgrom 1999). During the bidding process itself, stakeholders learn about pricing during the early stages of the process and continually return bids for desired items through successive rounds, always aware of current high bids and bidders for each “item” put up for sale (Cramton 2004; Millgrom 1999).
Again, though technically anyone with broadcasting/communications capabilities that can sufficiently utilize the frequencies and/or bandwidth being purchased is able to participate in auctions for these frequencies, the ultimate price of sections of the radio spectrum are prohibitive to most entities from entering the bidding process. There might be nominal fees associated with participating in the bidding process, but in general simultaneous ascending auctions generate such huge revenues that they far more than offset the cost of conducting the auctions themselves (Cramton 2004; Millgrom 1999). The real limitation in participation comes from the high cost of the spectrum frequencies in the final bid, as well as providing evidence of the ability to fully utilize the frequencies once purchased, both of which preclude all but the largest of corporation from taking part in the process.
Electromagnetic waves are a natural phenomenon and run the gamut from very-low frequency waves traveling through space to extremely high frequency cosmic rays, with the radio spectrum, the visible light spectrum, microwaves, x-rays, and a multitude of other waves in between. The most useful sections of the spectrum are highly sought commodities in the modern era of advanced communications via satellites, radio and television broadcasting, wireless Internet, and cell phones. As demand increases, the complexity and the costs of frequency allocation have also increased, these trends seem likely to continue into the future.
Cramton, P. (2004). “Simultaneous ascending auctions.” Accessed 18 October 2010. http://www.cramton.umd.edu/papers2000-2004/cramton-simultaneous-ascending-auction.pdf
Cringely, R. (2008). “Everything You Always Wanted to Know About the 700-MHz Auction but Were Afraid to Ask.” Accessed 18 October 2010. http://www.popularmechanics.com/technology/gadgets/news/4246037
FCC. (2010). “Online table of frequency allocations.” Accessed 18 October 2010. http://www.fcc.gov/oet/spectrum/table/fcctable.pdf
FCC. (2010a). “Spectrum allocation, assignment, and enforcement.” Accessed 18 October 2010. http://www.fcc.gov/connectglobe/sec7.html
Huurdeman, A. (2003). The worldwide history of telecommunications. Hoboken, NJ: Wiley.
Kittross, J. & Sterling, C. (1979). Television frequency allocation policy in the United States. New York: Arno.
Milgrom, P. (1999). “Putting auction theory to work.” Accessed 18 October 2010. http://www.market-design.com/files/milgrom-putting-auction-theory-to-work.pdf
NASA. (2010). “Radio waves.” Accessed 18 October 2010. http://science.hq.nasa.gov/kids/imagers/ems/radio.html
NTIA. (2010). “Frequency allocation table.” National telecommunications and information association. Accessed 18 October 2010. http://www.ntia.doc.gov/osmhome/allochrt.pdf
Webpaz. (2010). “FCC vote on rules governing frequency allocation.” Accessed 18 October 2010. http://www.webpaz.com/fcc-commission-vote-on-rules-governing-frequency-allocation-process-white-space-broadband-wireless-innovation-alliance/
Withers, D. (1999). Radio spectrum management. London: Institution of electrical engineers.
Get Professional Assignment Help Cheaply
Are you busy and do not have time to handle your assignment? Are you scared that your paper will not make the grade? Do you have responsibilities that may hinder you from turning in your assignment on time? Are you tired and can barely handle your assignment? Are your grades inconsistent?
Whichever your reason is, it is valid! You can get professional academic help from our service at affordable rates. We have a team of professional academic writers who can handle all your assignments.
Why Choose Our Academic Writing Service?
- Plagiarism free papers
- Timely delivery
- Any deadline
- Skilled, Experienced Native English Writers
- Subject-relevant academic writer
- Adherence to paper instructions
- Ability to tackle bulk assignments
- Reasonable prices
- 24/7 Customer Support
- Get superb grades consistently
Online Academic Help With Different Subjects
Students barely have time to read. We got you! Have your literature essay or book review written without having the hassle of reading the book. You can get your literature paper custom-written for you by our literature specialists.
Do you struggle with finance? No need to torture yourself if finance is not your cup of tea. You can order your finance paper from our academic writing service and get 100% original work from competent finance experts.
While psychology may be an interesting subject, you may lack sufficient time to handle your assignments. Don’t despair; by using our academic writing service, you can be assured of perfect grades. Moreover, your grades will be consistent.
Engineering is quite a demanding subject. Students face a lot of pressure and barely have enough time to do what they love to do. Our academic writing service got you covered! Our engineering specialists follow the paper instructions and ensure timely delivery of the paper.
In the nursing course, you may have difficulties with literature reviews, annotated bibliographies, critical essays, and other assignments. Our nursing assignment writers will offer you professional nursing paper help at low prices.
Truth be told, sociology papers can be quite exhausting. Our academic writing service relieves you of fatigue, pressure, and stress. You can relax and have peace of mind as our academic writers handle your sociology assignment.
We take pride in having some of the best business writers in the industry. Our business writers have a lot of experience in the field. They are reliable, and you can be assured of a high-grade paper. They are able to handle business papers of any subject, length, deadline, and difficulty!
We boast of having some of the most experienced statistics experts in the industry. Our statistics experts have diverse skills, expertise, and knowledge to handle any kind of assignment. They have access to all kinds of software to get your assignment done.
Writing a law essay may prove to be an insurmountable obstacle, especially when you need to know the peculiarities of the legislative framework. Take advantage of our top-notch law specialists and get superb grades and 100% satisfaction.
What discipline/subjects do you deal in?
We have highlighted some of the most popular subjects we handle above. Those are just a tip of the iceberg. We deal in all academic disciplines since our writers are as diverse. They have been drawn from across all disciplines, and orders are assigned to those writers believed to be the best in the field. In a nutshell, there is no task we cannot handle; all you need to do is place your order with us. As long as your instructions are clear, just trust we shall deliver irrespective of the discipline.
Are your writers competent enough to handle my paper?
Our essay writers are graduates with bachelor's, masters, Ph.D., and doctorate degrees in various subjects. The minimum requirement to be an essay writer with our essay writing service is to have a college degree. All our academic writers have a minimum of two years of academic writing. We have a stringent recruitment process to ensure that we get only the most competent essay writers in the industry. We also ensure that the writers are handsomely compensated for their value. The majority of our writers are native English speakers. As such, the fluency of language and grammar is impeccable.
What if I don’t like the paper?
There is a very low likelihood that you won’t like the paper.
- When assigning your order, we match the paper’s discipline with the writer’s field/specialization. Since all our writers are graduates, we match the paper’s subject with the field the writer studied. For instance, if it’s a nursing paper, only a nursing graduate and writer will handle it. Furthermore, all our writers have academic writing experience and top-notch research skills.
- We have a quality assurance that reviews the paper before it gets to you. As such, we ensure that you get a paper that meets the required standard and will most definitely make the grade.
In the event that you don’t like your paper:
- The writer will revise the paper up to your pleasing. You have unlimited revisions. You simply need to highlight what specifically you don’t like about the paper, and the writer will make the amendments. The paper will be revised until you are satisfied. Revisions are free of charge
- We will have a different writer write the paper from scratch.
- Last resort, if the above does not work, we will refund your money.
Will the professor find out I didn’t write the paper myself?
Not at all. All papers are written from scratch. There is no way your tutor or instructor will realize that you did not write the paper yourself. In fact, we recommend using our assignment help services for consistent results.
What if the paper is plagiarized?
We check all papers for plagiarism before we submit them. We use powerful plagiarism checking software such as SafeAssign, LopesWrite, and Turnitin. We also upload the plagiarism report so that you can review it. We understand that plagiarism is academic suicide. We would not take the risk of submitting plagiarized work and jeopardize your academic journey. Furthermore, we do not sell or use prewritten papers, and each paper is written from scratch.
When will I get my paper?
You determine when you get the paper by setting the deadline when placing the order. All papers are delivered within the deadline. We are well aware that we operate in a time-sensitive industry. As such, we have laid out strategies to ensure that the client receives the paper on time and they never miss the deadline. We understand that papers that are submitted late have some points deducted. We do not want you to miss any points due to late submission. We work on beating deadlines by huge margins in order to ensure that you have ample time to review the paper before you submit it.
Will anyone find out that I used your services?
We have a privacy and confidentiality policy that guides our work. We NEVER share any customer information with third parties. Noone will ever know that you used our assignment help services. It’s only between you and us. We are bound by our policies to protect the customer’s identity and information. All your information, such as your names, phone number, email, order information, and so on, are protected. We have robust security systems that ensure that your data is protected. Hacking our systems is close to impossible, and it has never happened.
How our Assignment Help Service Works
1. Place an order
You fill all the paper instructions in the order form. Make sure you include all the helpful materials so that our academic writers can deliver the perfect paper. It will also help to eliminate unnecessary revisions.
2. Pay for the order
Proceed to pay for the paper so that it can be assigned to one of our expert academic writers. The paper subject is matched with the writer’s area of specialization.
3. Track the progress
You communicate with the writer and know about the progress of the paper. The client can ask the writer for drafts of the paper. The client can upload extra material and include additional instructions from the lecturer. Receive a paper.
4. Download the paper
The paper is sent to your email and uploaded to your personal account. You also get a plagiarism report attached to your paper.
PLACE THIS ORDER OR A SIMILAR ORDER WITH US TODAY AND GET A PERFECT SCORE!!!